Main Content
Fill & Finish 30 Premium
Fill & Finish 30 Premium
For bedding tapes & finishing joints with 30 minutes work-ability time.
About This Product
-
Key Facts
General Information
Knauf Finishing Products should be applied to Knauf Plasterboard to ensure System Performance Warranty as detailed in the GPDA’s Product Compatibility Statement.
For bedding tapes and finishing joints with 30 minutes workability time. A hand applied fast-setting multi-purpose gypsum-based compound for bedding tapes and beads, as well as finishing.
Coverage
Estimating Guide: To bed and fill to shoulders: 22.5m² per 5kg bag. 45m² per 10kg bag.
FAQs- Is Knauf Fill & Finish 30 Premium a chemical-setting or air-drying jointing compound?
Knauf Fill & Finish 30 Premium is a chemical-setting product.
- What does the 30 denote?
Knauf Fill & Finish 30 has 30 minutes working time.
- What is the shelf life of this product?
9 months shelf life.
- What bag sizes does Knauf Fill & Finish 30 Premium come in?
5kg and 10kg bag sizes.
- What is the Reaction to fire (R2F) for this product?
Knauf Fill & Finish 30 Premium has an A1 non- combustible R2F.
- How many coats of Knauf Fill & Finish 30 do I need when using it for taping and jointing?
Two coats are needed to achieve a smooth finished joint surface.
- Do I need to clean my tools after use due to the material being a chemical-setting product?
Yes, tools should be cleaned immediately after you have finished using the product.
- Can I use this product for square edge boards as well?
Yes, this product can be used for both board edge types.
- Can this product be used in a ‘bazooka’ applicator?
No, due to this material being chemical-set, we advise against using it in bazooka applicators due to the rapid setting time.
- Can this be used over air-drying products such as a joint filler and joint cement?
No, you should never use chemical-setting products over air-drying due to dry times being extended in the air-drying products.
- What tools can I use with this product?
Standard jointing tools can be used with this product.
- Can this product be used on Knauf AQUAPANEL®?
No, gypsum based products cannot be used on Knauf AQUAPANEL®.
-
Characteristics
- Why do you offer Joint Filler Premium and Joint Cement Premium, both bed tape and fill joints? Joint Filler Premium is a chemical set product and only used for bedding tapes and fixing beads. Joint Cement Premium is an air drying product which can be used for bedding and finishing joints, typically drying between 12-24 hours, subject to humidity & weather conditions.
- How long does the product take to install/drying time? Air drying products typically take 12-24 hrs. For our chemical set products, this varies and would be subject to humidity & weather conditions.
- Can I Spray apply your Premium Jointing range and similar products? If not, why not? The chemically setting products cannot be spray applied but the air drying options – Joint Cement premium, Fill & Finish Ready mix and the Airless range can be spray applied or used with Jointing machines. Please see the method statement for Knauf Premium Jointing Range.
-
Compliance
Complies to EN 13963 Type 3B
-
Scope of application
Estimating Guide: To bed and fill to shoulders: 22.5m² per 5kg bag. 45m² per 10kg bag.
9 months shelf life.
Knauf Finishing Products should be applied to Knauf Plasterboard to ensure system performance warranty, and as detailed in the GPDA’s Product Compatibility Statement.